An integral part of all ZistosHD portable video systems is the telescoping pole on which our cameras are fastened. Our poles are offered in two styles – manual positioning and motorized positioning:
Our “Friction Hinge” design provides for the end of the pole to be positioned manually at an angle of +/- 120 degrees. While easily bent, the hinge maintains the desired angle with a holding force that is strong enough to maintain the camera position, but it still allows the position of the camera to be adjusted by “nudging” the assembly against a stationary object or structure. The entire pole can be rotated to allow the camera to pan 360 degrees around an area. The friction hinge is protected with a rubber boot that prevents dirt and debris from entering the assembly. This design is best suited for an open environment, or when the access / entry point of the area to be inspected is large enough to accommodate the size of the camera assembly. It is also best used where the camera tilt position does not need to be continually adjusted. The advantages of this pole design are that it is usually lower in cost, uses less battery power, and is lighter in weight than the motorized poles.
The camera angle of our motorized pole is controlled remotely using the keypad on the pole handle or using the touchscreen display on the included tablet. The camera can be positioned at an angle of +/- 120 degrees at a speed of articulation controlled by the user. The gearhead motor is designed with a special slip-clutch that protects the motor against mechanical shock, if the motor is back driven by a camera head being pushed back when mounted to the motorized assembly. Like the above friction hinge pole, the motorized pole can be rotated to allow the camera to pan 360 degrees. The advantages of this design are that it allows inspection of areas with narrow openings that only allow the camera to be inserted in its smallest footprint orientation (usually 0 degrees, positioned straight); or when the application requires inspection of a broad area and constant adjustments to the camera position are required.
Problems with 360 Degree Video Pole Cameras:
There are some systems that are available from other manufacturers, which use poles that offer no articulation. The reason for this is that they use cameras that provide 360-degree imaging and claim that no panning of the camera is required. This in practice is problematic because of several issues that impact image quality to a significant extent. One of the main problems is that generating even illumination in a dark area is not easily achieved. This creates dark areas in the inspection location and limits the image details that can be observed by the inspector. The ZistosHD product line uses traditional camera optics on their cameras. The traditional video cameras used in the ZistosHD system produce a bright beam of light that is bore-sighted with the field of view of the camera and will always produce a usable image regardless of orientation. The other issue has to do with image resolution and zoom capabilities. The 360-degree cameras are limited to using only digital zoom using software processing. Digital zoom reduces the resolution of an image when you zoom in. This means that the bigger the image gets on your screen; the less detail is observable. The ZistosHD systems have optical zoom cameras available that allow the user to zoom into image details without losing any image resolution. In addition, ZistosHD offers thermal imaging options, which are not available with 360 degree systems.
ZistosHD poles are lightweight, carbon fiber and are available in lengths from 2’ to 30’. The sections that telescope in and out can be locked into position with collars that are turned by hand. All ZistosHD camera heads and pole are interchangeable, so a system can be equipped with different add-ons and attachments to address varied application needs.
Whatever your application – tactical surveillance, urban search and rescue, vehicle/cargo search, or industrial inspection – please call us for more information or to set up a no-obligation in-person or virtual product demonstration.